Fuel Cell Stacks

The Fuel Cell Start / Run Block is perfect for Horizon Fuel Cells: Horizon H-100, 100 Watt Fuel Cell Horizon H-200, 200 Watt Fuel Cell Horizon H-500, 500 Watt Fuel Cell

Advantages: Up t 48 cell vltages per mdule 0 4.5 V per channel High accuracy up t 0.1 mV Integrated vltage limit mnitring ptimized fr fuel cells, redx-flw-batteries, electrlyzers and batteries

(4) Tubing Clamps Brand: Fuel Cell Store Product Code: 623002 White tubing clamps for use with 3/32" to 1/4" diameter tubing. Attach clips to the end of tubing to stop the flow of water or gas when using tubing on compatible fuel cell. Temperature Range: 32 to 200F Quantity: 4

Output Performance: Nominal Power: 3000 W Nominal Voltage: 48 V Nominal Current: 62.5 A DC Voltage Range: 40 - 72 V Efficiency:>50% at the nominal power Hydrogen Fuel: Hydrogen Purity:>99.99% (CO content being <1 ppm) Hydrogen Pressure: 0.04 - 0.06 MPa Hydrogen Consumption: 35.1 L/min (at nominal power) Environmental Characteristics: Ambient Temperature: -5 to +35 C Ambient Humidity: 10% RH to 95% RH (No misting) Storage Ambient Temperature: -10 to +50 C Noise: <60 dB Physical Characteristics: Stack Size (mm): 320*268*115 Stack Weight: 7.000 kg Controller Size (mm): TBD

Output Performance: Nominal Power: 60 W Nominal Voltage: 13 VDC Nominal Current: 4.6 A DC Voltage Range: 10-19 VDC Efficiency:>50% at the nominal power Hydrogen Fuel: Hydrogen Purity:>99.99% (CO content being <1 ppm) Hydrogen Pressure: 0.45 - 0.6 bar Hydrogen Consumption: 708 mL/min (at nominal power) Environmental Characteristics: Ambient Temperature: -5 to +35 C Ambient Humidity: 10% RH to 95% RH (No misting) Storage Ambient Temperature: -10 to +70 C Noise: <60 dB Physical Characteristics: Stack Size (mm): 125 x 88 x 85 Stack Weight: 550 g Controller Size (mm): 87 x 38 x 113 Controller Weight: 240 g

Use these Tee Connectors with tubing to split or combinegases from an electrolyzer. They are very useful when using more than onefuel cell for electrolysis. These connectors will also help minimize leaks in yourlinesthese single-barbed fittings have a smooth surface that creates snugtubing connections. Fittings can be sterilized with steam (autoclaving).

Direct Methanol Fuel Cell, 111 - Technical Speciications: Electrode Area: 4 cm2 Generated Power: 10 mW Generated Voltage: 300 - 500m V DC uel: Approx. 3% Methanol Solution (by weight) Dimensions (H x W x D): 2" x 2" x 1.6" (50 x 50 x 40 mm) Weight: 2.1 oz (60 g)

Technical Data: Rated Power: 75W Current Output: 220/230 VAC - 110/120 VAC - 50/60Hz Supply Pressure: 6 - 25 bar Hydrogen Purity: 99.995% (grade 4.5) Max H2 Flow Rate: 1.6 L/min Size: 40.5 x 30 x 20 cm Weight: 11 kg Socket: European standard

Quattro Fuel Cell H2/O2/Air, F105 - Technical Specifications: Power in Fuel Cell H2/O2 Mode: 2 W Power in Fuel Cell H2/Air Mode: 600mW Dimensions (H x W x D): 2.5" x 2.4" x 2.5" (62 x 60 x 62 mm) Weight: 2.6 oz (78 g)

Double Fuel Cell H2/O2/Air, F104 - Technical Specifications: Power in Fuel Cell H2/O2 Mode: 1 W Power in Fuel Cell H2/Air Mode: 300mW Dimensions (H x W x D): 2.2" x 1.6" x 2" (56 x 42 x 40 mm) Weight: 2.1 oz (60 g)

Technical Specifications: Rated/Gross Power: 50/60W Rated/Gross Current: 4.2/5A Voltage Output: 12-18V DC Start-up Time: 5s Operating Ambient Temp.: (0,40]C Operating Altitude: 1500m AGL System Weight: 480g Dimensions: 130 76 85 mm

Technical Specifications: Electrode Area: 10 cm Ports: 4 Flow Rate: 10 to 80 cc/minute at 1 Amp 1 Volt for charging For Charging: 1 Amp / 1 Volt Liquid is fed into the bottom and out the top. Dimensions: 3.25" x 3.25" x 2" (8.26 x 8.26 x 5.1 cm) Recommended Torque Value: 8-10 inlbs

Technical Properties: MEA Active Area: 3.2 x 3.2cm (10cm) MEA Membrane Area: 5.3 x 5.3cm Fittings: 4 x 1/8" Push-to-connect (2 per reactant side) Graphite Plate Overall Dimensions (L x W x D): 6.3 x 6.3 x 0.4 cm Recommended Torque Value: 8-10 inlbs

Technical Properties: MEA Active Area: 3.2 x 3.2cm (10cm) MEA Membrane Area: 5.3 x 5.3cm Graphite Plate Overall Dimensions (L x W x D): 6.3 x 6.3 x 0.4 cm Recommended Torque Value: 8-10 inlbs

Technical Specifications: Power Per Cell: 200 mW Total Power (3 Cells): 600 mW Generated Voltage: 0.4 - 0.96 V per cell Electrode Area: 4cm per cell Dimensions (H x W x D): 2.4" x 3.7" x 2.8" (60 x 95 x 70 mm) Weight: 7.4 oz (211 g)

Technical Specifications: Power Per Cell: 200 mW Total Power (10 Cells): 2 W Generated Voltage: 0.4 - 0.96 V per cell Electrode Area: 4cm per cell Dimensions (H x W x D): 2.4" x 7" x 2.8" (60 x 178 x 70 mm) Weight: 15.2 oz (430 g)

Technical Specifications: Rated Power: 150W Rated Current: 12.5A Voltage Output: 12-18V DC Start-up Time: 5s Operating Ambient Temp.: (0,40]C Operating Altitude: 1500m AGL System Weight: 470g Dimensions: 109 x 101 x 84 mm

Technical Data (DC Version): Rated Power: 450W Rated Voltage Output: 48 V DC Output DC (1A): USB / 12 V DC Hydrogen Purity: 99.995% (grade 4.5) Supply Pressure: 6 - 25 bar Max Hydrogen Flow Rating: 7 L/min Size: 40 x 60 x 25 cm Weight: 21 kg

Hydrogen Fuel: Hydrogen Purity:>99.99% (CO content being <1 ppm) Hydrogen Pressure: 0.04 - 0.06 MPa Hydrogen Consumption: 7000 mL/min (at nominal power) Environmental Characteristics: Ambient Temperature: -5 to +35 C Ambient Humidity: 10% RH to 95% RH (No misting) Storage Ambient Temperature: -10 to +50 C Noise: <60 dB Physical Characteristics: Stack Size (mm): 205*168*90 Stack Weight: 1.965 kg Controller Size (mm): TBD Controller Weight: TBD System Size (mm): 205*205*130 System Weight: 2.590 kg.

Fuel Cell H2/O2/Air, F103 - Technical Specifications: Power in Hydrogen and Oxygen Mode: 900 mW Power in Hydrogen and Air Mode: 300 mW Electrode Area: 2.9 cm Generated Voltage: 0.45 - 0.96 V DC Dimensions (H x W x D): 2.0" x 2.0" x 1.6" (51 x 51 x 41 mm) Weight: ~2oz (58 g)

Output Performance: Nominal Power: 300 W Nominal Current: 18 A (at nominal power) Open Circuit Voltage: 30 V Number of cells in the stack: 30 Operational Voltage Range: 15 - 30 V Efficiency: 45% at 300W Hydrogen Fuel Requirement: Hydrogen Purity:>99.99% (CO content being <1 ppm) Hydrogen Pressure: 250 - 350 mbar Hydrogen Consumption: 4.5L/min (at nominal power) Environmental Characteristics: Ambient Temperature: 5 to 55 C Physical Characteristics: Stack Size (mm): 175*85*95mm Stack Weight: 1.7kg Couplings: G1/4" (Female Thread)

Technical Data (DC Version): Rated Power: 4500W Rated Voltage Output: 48 V DC Output DC (1A): USB / 12 V DC Hydrogen Purity: 99.995% (grade 4.5) Supply Pressure: 6 - 25 bar Max Hydrogen Flow Rating: 70 L/min Size: 100 x 80 x 21 cm Weight: 90 kg

Boost Buck DC Converter Brand: Fuel Cell Store Product Code: 202173 This Boost Buck Converter can be stabilized at 12 V regardless if the input voltage is 5, 12 or 32 V. These converters are great for a car regulator, solar photovoltaic cells, wind power, and other applications of voltage instability. This converter will work with the Horizon 12W, 20W, and 30W PEM Fuel Cells Stacks. It is also suitable for the 5-cell, 10-cell, 15-cell, or 20-cell Flex-Stak Assembled units. This converter is not designed for single cell units. Features: Input Voltage Range: 3.8 - 32 V Output Voltage Range: 1.25 - 35 V Input Current: 3A (max) Conversion Efficiency: <94% Switching Frequency: 400 KHz Output Ripple: 50 mV Load Regulation: +/- 0.5% Operating Temperature: -40 to +85

Features: Input Voltage Range: 4 - 35 V DC Output Voltage Range: 1.23 - 30 V DC Adjustable Input Current: 3A (max) Voltmeter Range: 0 - 40 V Conversion Efficiency: 92% Switching Frequency: 150 KHz Output Ripple: 30 mA (max)

Features: External measuring transformer card for measuring and recording the characteristics of fuel cell models: voltage, current, and time Connects to a computer via USB cable Supplied software allows you to plot the fuel cell stacks voltage-current, power-voltage, power-current, power-time characteristics Recording can be done automatically, at certain voltage or current points or manually Data recording as .txt or .csv format

Technical Specifications: USB (Universal Serial Bus) - USB v2.0 high speed device; bus powered CAN (Controller Area Network) - Up to 16 possible slave addresses RS-232/RS-485 Serial Interface - Modbus Available Configuration Software - Included software application allows you to set up, log, and analyze up to 16 CVMs in one application. Software Development Tool-Kit - Provided SDK allows developers to develop custom software applications DLLs and LabView VIs available. Dimensions - 4.7 x 4.1 x 1.2 (121 x 104 x 32 mm) at 0.55 lb (250 g)

This DC/DC converter is specially modded by the Fuel Cell Store for low voltage operation for single cell or small fuel cells. With an input voltage as low as 0.3 V and a user selectable output voltage of either 3.3V or 5V, this DC/DC is well suited for when you would like to use a single cell fuel cell (such as the Mini PEM Reversible, Mini PEM Fuel Cell, or Flex-Stak) to replace or even charge batteries. The input voltage can range from 0.3 V (good for single cell fuel cells) up to 5.5 V (good for stacks up to ~9 cells). The output is 5V at 600mA Max (default) or 3.3V at 200mA max (solder jumper adjustable).

Key Features: Operating pressure 150 psig with clear polycarbonate bowl Max Operating temperature 52C Water removal 1.0m Automatic Drain Designed for pressurized gas line Maximum Flow 260 L/min

The Multimeter is designed to measure the voltage and current of fuel cells, electrolyzers input and solar panels. Measures DC and AC Voltage, DC Current and Diode and attaching a K type probe (not included) will allow users to measure temperature as well. A convenient knob audible continuity and well marked settings make measurements a breeze. Use this multimeter to test and record the different electrical inputs and outputs of your fuel cell system. Max Current Measurement: 10 Amps

Technical Specifications: Capacity: 0.170 oz (5 cc) Color: Semi-Clear

Features: Input: 6V - 40V Output: 5V 3A (max) Efficiency: 92% (max) Switching frequency: 150kHz Working temperature: -40C to +85C Load capacity: maximum output 3A Size (L x W x H): 59 x 21 x 17 mm

Use these Wye Connectors with tubing to split or combine gases from an electrolyzer. They are very useful when using more than one fuel cell for electrolysis. These connectors will also help minimize leaks in your linesthese single-barbed fittings have a smooth surface that creates snug tubing connections. Fittings can be sterilized with steam (autoclaving).