- Silver grey
- Conductive epoxies
SILVER/CARBON CONDUCTIVE EPOXY G6E-NS10
Conductive epoxies can be used to form an electrically conductive bond between dissimilar materials eliminating the need for soldering. Traditional silver-based epoxy materials require up to 80% weight load of silver fillers and as a result tend to be costly, brittle and prone to mechanical failure.Â
Silver/Carbon Epoxy G6E-NS10Â is a two component adhesive for high performance bonding, sealing and coating purposes. G6E-NS10 is intended to be cured at elevated temperatures. It can cure at room temperature in 60 hours or much more rapidly at elevated temperatures. Recommended curing temperature is 150ÃÂ°C. Volume resistivity of as low as 0.005Â ohm cm can be achieved under optimum curing conditions.
TWO COMPONENT SYSTEM: Part A - smooth thixotropic dark grey paste, Part B -smooth thixotropic silver paste.
THE MIX RATIO: 100 (Part A) to 100 (Part B) by weight.
CURING INSTRUCTIONS: Best results are obtained when product is cured at one of the following parameters: 60 hours @ 25ÃÂ°C, 3 hours @ 70ÃÂ°C or 1 hour @ 150ÃÂ°C
COLOR: Silver grey
POT LIFE: 4Â hours
GLASS TRANSITION TEMPERATURE: 103ÃÂ°C (cured at 150ÃÂ°C)
MIXED VISCOSITY: 150 - 155 PaÃÂ·s at 25ÃÂ°C/77 F
HARDNESS, SHORE: >60D
VOLUME RESISTIVITY:Â Less thanÂ 0.005 ohmÃÂ·cmÂ
For any further query please contact us.
- Middle East, Eastern Europe, North America, Asia
- All India
- Technical Data sheets are available upon request
B- 205, Prime Blue Forest, Rajapallya, Hoodi, Bengaluru, Karnataka, 560048, India